ask you to open or mechanically/electronically alter the Accessport. At no time will ANY authorized representative of COBB Tuning, Inc. Doing so puts the components at risk of damage from, but not limited to, static shock. Never attempt to open your Accessport or any associated equipment. Never store your Accessport in an area that experiences any noticeable levels of vibration, static electricity, heat shock, or excessive swings in relative humidity. Be careful not to drop your Accessport or any associated parts. Your Accessport may be damaged by improper storage or handling. In such cases, please contact Technical Support BEFORE attempting to the use the Accessport. If your Accessport or any associated equipment gets wet, professional repair may be required. Take care to prevent any liquids from coming in contact with the Accessport or any associated equipment. Never store your Accessport in an area that receives direct sunlight. When storing the Accessport, do so in a place where temperature is always between 0° and 115° F (-18° and 46° C) and a relative humidity below 90%. If the Accessport is not booting up correctly or the screen does not show everything correctly, turn the device off and move it to a cooler environment temporarily. The Accessport is thermally protected and will not function if the temperature reaches extremely high levels. Using the Accessport outside of these recommendations may result in damage. The Accessport is designed to be operated at temperatures between 32° and 95° F (0° and 35° C) and with a relative humidity below 90%. Technical support will instruct you on what to do next. brand new model year, new world market ECU, etc.). It is possible that you have an ECU type that we have never encountered before (e.g. If the Accessport is up to date and still cannot identify the vehicle, please contact technical support.You can verify this by connecting the Accessport to AP Manager. Ensure that the Accessport is running the most recent version of firmware.Try another function, such as Read Codes, to see if that is able to communicate with the vehicle.Īccessport cannot identify vehicle during installation.Plug everything back together securely to make sure you have good contact on all connections. Closely inspect all connections to make sure nothing is out of place. Unplug the OBD-II cable from the vehicle and Accessport.Verify that the vehicle's ignition is turned to the "ON" position (not Acc.) before selecting the option on the Accessport.NOTE: The 10 log files can be a combined length of 2+ hours long.Īccessport will not communicate with vehicle. If datalogging is started when there are already 10 log files on the Accessport, the log file with the lowest numerical value will be automatically overwritten. NOTE: Up to 10 log files can be stored on the Accessport. The Accessport will display an error message if it cannot communicate with the vehicle. NOTE: The Accessport is only capable of datalogging while the ignition is turned to the ON position. If you receive this prompt, reduce the amount of monitors you are recording. NOTE: You will be notified if you have exceeded the recommended amount of monitors to record in one datalog. Reset to Defaults – Restore the datalog list to the default list Sort Monitors – Sort the monitor list alphabetically, then reverse-alphabeticallyĬlear Monitors – Clear all monitors from the datalog list Press to find the Setup option for Configure Datalog where you will find the following options:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |